Exmark Lazer Z X-Series 72"
This is Getting Noticed! 12 people viewed in last 7 days
$20,000.00
Key Features
New/Used New
Availability
In Stock
LocationAtlantic Location
Primary ColorRed
Stock #
LAZER Z X-Series 72"
Condition
Excellent
Product Features
Dealer Notes
Shop Olsen's Outdoor Power with 2 locations in Southwest Iowa. Serving Western Iowa, Southwest Iowa, Southeast Nebraska cities including Omaha, Council Bluffs, Nebraska City, Plattsmouth, Glenwood, Treynor, Carson, Oakland, Avoca, Harlan, RedOak, Corning, Elliott, Atlantic, Audubon and all points in between.
What you get when you check all the boxes.
And with our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There's even a standard 12-volt adapter to keep devices charged. So, if you're looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
Features
Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
A New Level of Comfort: Comfort increases productivity. That's why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Rear Discharge Deck: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake: Lever-actuated disc brake.
Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical: 12-volt battery with 25-amp alternator.
Onboard Intelligence: RED Technology
Standard Features: 12-volt plug-in, engine hour meter and cup holder
UPC: 193308000756
Power Components
Engine Brand: Kohler®
Engine Model: ECV980
Engine Displacement: 999
Engine Series: Command™ EFI
Engine Speed: 3,650 RPM
Air Filter: Heavy-duty canister air filtration system
Fuel Type: Gas EFI
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator: Yes - electronic Sender
Drive: Hydro-Drive
Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed: Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release: Allows unit movement without engine running.
Casters: .50" thick caster yoke arms.
Model Description: Lazer Z X-Series 38 HP* Koh EFI EGov ECV980 w/72" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum
Decks
Width / Cutting Deck: 72"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades: 3 Blades at 24.50" Length
Dimensions
Width: 84.9 in. (215.6 cm)
Length: 86.1 in. (218.7 cm)
Height: 70 in. (177.8 cm)
NOTES:
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
Price: $16,000.00
Location: Atlantic Location
Year: 2019
Manufacturer: Exmark
Model: LZX980EKC726W0
New/Used: New
Primary Color: Red
Condition: Excellent
Title: Clean
Engine
Engine Manufacturer: Kohler®
Engine Type ECV980
Displacement: 999cc
General
Transmission Hydro-Drive
Wheel Size 24 x 12.0-12, 4-ply Turf Master®
Fuel Capacity 12 gal. (45.4 L)
Deck
Deck Size 72 in.
What you get when you check all the boxes.
And with our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There's even a standard 12-volt adapter to keep devices charged. So, if you're looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
Features
Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
A New Level of Comfort: Comfort increases productivity. That's why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Rear Discharge Deck: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake: Lever-actuated disc brake.
Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical: 12-volt battery with 25-amp alternator.
Onboard Intelligence: RED Technology
Standard Features: 12-volt plug-in, engine hour meter and cup holder
UPC: 193308000756
Power Components
Engine Brand: Kohler®
Engine Model: ECV980
Engine Displacement: 999
Engine Series: Command™ EFI
Engine Speed: 3,650 RPM
Air Filter: Heavy-duty canister air filtration system
Fuel Type: Gas EFI
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator: Yes - electronic Sender
Drive: Hydro-Drive
Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed: Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release: Allows unit movement without engine running.
Casters: .50" thick caster yoke arms.
Model Description: Lazer Z X-Series 38 HP* Koh EFI EGov ECV980 w/72" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum
Decks
Width / Cutting Deck: 72"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades: 3 Blades at 24.50" Length
Dimensions
Width: 84.9 in. (215.6 cm)
Length: 86.1 in. (218.7 cm)
Height: 70 in. (177.8 cm)
NOTES:
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
Price: $16,000.00
Location: Atlantic Location
Year: 2019
Manufacturer: Exmark
Model: LZX980EKC726W0
New/Used: New
Primary Color: Red
Condition: Excellent
Title: Clean
Engine
Engine Manufacturer: Kohler®
Engine Type ECV980
Displacement: 999cc
General
Transmission Hydro-Drive
Wheel Size 24 x 12.0-12, 4-ply Turf Master®
Fuel Capacity 12 gal. (45.4 L)
Deck
Deck Size 72 in.